Difficulty: Moderately EasyInstructionsThings You'll Need:
- Socket set, metric
- Socket wrench
- Socket extension
- Spark plug socket
- Spark plugs
- Step 1
Unbolt the engine cover. Remove the bolts with a hex socket and socket wrench. Pull the engine cover away from the engine. Set it aside.
- Step 2
Disconnect the ignition coil from the wiring harness by pressing down on the wiring coupling's lever. Pull the coupler free from the ignition coil.
- Step 3
Remove the mounting bolt from the ignition coil using a socket wrench and pull the coil upwards to remove it from the engine. Set the coil aside.
- Step 4
Unscrew the spark plug using a spark plug socket and extension. Pull the spark plug out of the engine and discard.
- Step 5
Insert a new spark plug into the spark plug socket and tighten it into the engine.
- Step 6
Place the ignition coil over the spark plug. Press down firmly until the coil snaps into place over the spark plug. Secure the coil by tightening the mounting bolt with a socket wrench. Reconnect the wiring coupler to the ignition coil.
- Step 7
Repeat on the remaining spark plugs as necessary.
- Step 8
Replace the engine cover over the engine. Tighten all the mounting bolts with a socket wrench.